Introduce

The processing methods of metal stamping parts metal stamping parts are diversified. Not only can all the shape parts be processed by following one of them, but the processing method needs to be determined according to the shape of the parts. An important step is the selection of materials. The materials are well selected and the product quality is strong.
metal stamping parts processing In the current market, ordinary hardware parts can be bought everywhere on the street, so there is a reason why many hardware processing factories are facing bankruptcy. With the improvement of the current technical requirements, ordinary processing equipment can no longer meet the current customers' needs for metal stamping parts processing, especially some high-precision ones. For example, the current processing of medical equipment, aviation parts, watch parts, auto parts and other processing requires sophisticated equipment and senior technical personnel to assist in completion.
deep draw stamping has been focusing on the processing of hardware non-standard custom parts and micro-hole processing for ten years. It selects high-quality stainless steel and aluminum materials. For the elasticity, environmental protection, and salt spray evaluation of the material itself, it checks every layer to improve product quality. Let's talk about the shape of metal stamping parts depends on those factors?
metal stamping parts manufacturers call the layout method of blanking parts on sheets or strips. There are many ways to lay out punching parts, but the selection of the layout form is related to the shape of the stamping part.
1. car radiator cap Stamping parts with simple geometric shapes such as square tables, rectangles and circles, choose straight rows;
2. T-shaped, L-shaped, S-shaped, cross-shaped, round stamping parts, choose oblique rows;
3. For more than two kinds of stamping parts with the same material and thickness, use mixed row;
4. For mass production of small round, hexagonal, square and rectangular stamping parts, use multiple rows;
5. For mass production die casting parts of small and medium-sized narrow stamping parts such as watch needles and similar stamping parts or strips, continuous deep drawing is performed, and punching and lap edges are selected.
When the shape and size of metal stamping parts do not meet the requirements, the main reason is springback and positioning. In view of the rebound problem of bending stamping parts, the metal stamping parts factory uses air cushions and rubber springs to generate compressive force to compress the plate before bending. In Investment casting parts order to achieve this purpose, the ejection height of the pressing plate and pressing rod should be higher than the die plane.
The processing of metal stamping parts needs to be under specific conditions, and sometimes the initial positioning of the shape is used to roughly control the blank within a certain range. convenient.
According to die casting parts the above, when designing metal stamping parts, we must choose a mature mold structure and standard structure. The mold should have sufficient rigidity to meet the requirements of service life and accuracy. The design structure should be simple, practical and reasonable, easy to feed, simple and safe to operate, and easy to flow out of the workpiece. The setting of the mold should be accurate and reliable between parts processing, and the connection should be firm. It is beneficial to the processing of metal stamping parts. The mold structure should be coordinated with the existing stamping equipment, the mold is easy to install, and the wearing parts are easy to replace.

Company Profile